Electrolysis Products that work

the_flusher.jpg (267040 bytes) the_arrestor.jpg (268560 bytes) galaf.jpg (74128 bytes) one_way_ground.jpg (412047 bytes) anode_cap.jpg (285028 bytes)
Step 1
Cooling system flusher
Step 2
Electrolysis Arrestor
Step 3
New antifreeze
Step 4
Ground the heater
Step 5
Add an Anode

Do these products interest you?



96 SUBURBAN 
Why is my radiator leaking? 


The coolant that we drained out was green, yet the radiator is showing dirty brown.


The residue from old spent coolant can "hide" in the block and harbor acids that allow and encourage electrolysis.


The electrolysis has found a weak spot on the middle of the radiator core as shown by the discoloration.

dexmud7.jpg (394926 bytes)

 

No protection from Dex-cool. Just a matter of time before electrolysis ate it up.


 

GMC TOP KICK

The cooling system had a measurable voltage of .6v. This radiator was about 2 years old.

 


 

1997 FORD EXPEDITION

 90,000 miles. Coolant never changed.

Black area at bottom left of heater is where leakage was occurring. 

Notice the black "burned" look in the heater tubes.

 

2002 Town Car

Had .56v. The coolant was almost black. It took almost a week to reduce the electrolysis. Look at the sediment at the bottom.

electrol22.jpg (365422 bytes)
The heater tubes show the trauma that the acidic voltage carrying coolant has done. electrolysisheater3.jpg (208668 bytes)

 

1994 Ford Taurus

Leaks near inlet tank. Radiator less than 1 year old.

94 Taurus 3.8
 

Electrolysis can be arrested and prevented!